Posted in

Can bespoke aluminium extrusions be used for solar panels?

If you’ve ever installed or helped design a solar panel array, you know the quiet engineering that goes into making something that lasts 25+ years, stands up to rain, wind, sun and extreme temperatures, and aligns perfectly with the terrain it sits on. For most people, that work hides behind flat panels and racks, but I’d argue the unsung hero here is the metal profile holding those panels in place. For 12 years, I’ve run a bespoke aluminium extrusion business, working with solar installers, EPCs, and system designers to craft custom components, and one question comes up more often than you might think: Can bespoke aluminium extrusions actually be used for solar panels? Bespoke Aluminium Extrusions

The short answer is yes, but not in the generic way many people assume. Solar mounting isn’t one-size-fits-all, and off-the-shelf extrusions rarely solve the specific headaches a project throws at you. Let’s break this down, starting with why aluminium is the go-to metal for solar, then where custom extrusions add value, and finally why working with someone who builds these to your exact needs beats grabbing a pre-made profile from a hardware store or industrial supplier.

First, let’s get the science right. Aluminium is the perfect base for solar hardware because of a mix of properties that make it unbeatable for outdoor use. It’s lightweight—about a third the weight of steel, which cuts down on shipping costs, requires less structural support for roofs or ground mounts, and reduces labor time during installation. But it’s also incredibly strong for its weight: a well-extruded aluminium profile has a tensile strength that’s more than enough to hold 50-plus pound solar panels, even in hurricane zones or areas with heavy snow loads. Most importantly, aluminium is naturally corrosion-resistant. When it’s exposed to oxygen, it forms a thin, invisible oxide layer that stops rust, so it doesn’t degrade over time like steel would unless you add a costly protective coating. That oxide layer can also be anodized or powder coated for extra UV resistance, which is critical for solar that sits in direct sun 12 hours a day for decades.

But here’s the thing: those generic extrusions you can buy for general construction or fencing are designed for straight, static applications. Solar has unique demands that off-the-shelf parts just can’t handle. Let’s talk about some of the scenarios where bespoke extrusions aren’t just a nice-to-have, but a requirement.

Take commercial roof arrays, for example. Many commercial roofs have irregular shapes—offset HVAC units, skylights, sloped sections that aren’t uniform, or load limits that make it impossible to use standard heavy racks. I worked on a project last year for a grocery chain in the Pacific Northwest that had a roof dotted with 14 different ductwork penetrations. The standard racking the installer had planned to use would have required cutting around each duct, leaving gaps that meant some panels were misaligned, or adding extra support beams that the roof couldn’t bear. We designed a custom U-channel extrusion that followed the exact contour of the roof, with pre-drilled slots that fit around the ducts without any extra cutting, and integrated notches that let the installer slide panels in without fasteners that would puncture the roof membrane (a big no-no for most commercial roofs, which can leak and cost thousands in repairs). That project ended up using 22% less aluminium than the off-the-shelf alternative, cutting material costs by 18% and installation time by three days.

Another big use case is ground mount systems for uneven terrain. If you’re installing on a hillside or a field that’s got gentle slopes, rock outcroppings, or low spots, standard extrusions are straight, so you end up with gaps between the mount and the ground, or you have to build up supports that look messy and add wind resistance. We worked with a farm in Iowa last spring that wanted to add 50 kW of solar to their 40-acre sloped pasture. The initial plan was to use adjustable steel racks, but they kept sliding on the loose soil in the spring rains. We extruded a custom T-profile with a built-in foot that could be cut on site to match the exact slope of each section of land, and added integral drain channels that let rainwater flow through instead of pooling at the base of the mount. The farm ended up not needing to add concrete footings for half the array, which saved them over $10,000 in foundation costs.

Even rooftop residential arrays can benefit from custom extrusions, especially if you’re dealing with unique roof types like standing-seam metal roofs, which require specific clamps that don’t puncture the surface, or low-slope roofs that need low-profile mounts to avoid catching wind. Last year, a homeowner in Arizona wanted to install panels on a small patio roof that only had 12 inches of space between the edge of the roof and the patio awning. Off-the-shelf racks were too wide, so we designed a slim, 2-inch wide extrusion that fit the gap perfectly, with integrated clips that clamped to the awning frame without drilling into either the roof or the awning, and a powder coat finish that matched the awning’s color so it didn’t stick out like an eyesore. The installer said it cut their time on that job by half, since there was no trimming or modifying parts on site.

Of course, some people will ask: Why not just machine parts from solid aluminium? Or use 3D printed components? Let’s be real. For solar, you need a profile that’s consistent, can be produced in long runs (most solar mounting parts are 10+ feet long), and has a uniform strength across every part. Extrusion is the process of pushing aluminium billet through a die to create a profile with a fixed cross-section, which is way more cost-effective than machining from solid, especially for large quantities. And while 3D printing works for small prototypes, it doesn’t have the tensile strength or UV resistance needed for 25-year outdoor use. Extruded aluminium can also be easily modified on site with standard tools, which is critical for solar installers who often run into last-minute changes.

Now, it’s not all smooth sailing. There are a few things you have to get right when using bespoke extrusions for solar, and that’s why it’s important to work with an extrusion supplier who knows the solar industry, not just general metalworking. First, you have to account for thermal expansion. Solar panels get hot—up to 180 degrees Fahrenheit on a summer day—and aluminium expands and contracts with temperature changes. If you design an extrusion that’s too tight around the panel, the expansion can cause the panel to crack, or the extrusion to bend over time. A good solar extrusion will have intentional gaps or sliding clips that let the profile move without putting stress on the panel. Second, you have to make sure the extrusion is the right alloy. Not all aluminium is the same: 6061-T6 is the standard for solar because it’s strong, corrosion-resistant, and easy to extrude and anodize. Some cheap extrusions use lower-grade alloys that will corrode faster, which can lead to failed mounts and damaged panels. Third, you have to design for wind and snow loads. Solar in Florida needs to withstand 150 mph winds, while solar in Colorado needs to support 50 psf of snow. A bespoke extrusion can be reinforced in the areas that need extra strength, without adding unnecessary weight to the parts that don’t.

There’s also a sustainability angle that a lot of people overlook, which is a big deal for solar projects. Aluminium is 100% recyclable, and extruding it uses 95% less energy than making new aluminium from bauxite. When you build custom extrusions that fit your exact project, you’re not wasting material on parts that are too long, too wide, or more heavy than you need. That cuts down on waste, which is a big selling point for many solar customers who want their energy system to be as eco-friendly as possible.

I’ve seen a lot of suppliers try to push standard extrusions as a one-size-fits-all solution for solar, and while they work for some simple projects, they fail when things get complicated. The best projects I’ve worked on have a clear brief: “This is the layout, this is the roof/terrain, this is the load requirement, here’s the specific constraint we can’t get around.” Then we design a custom extrusion that solves that exact problem. It’s not about making something fancy—it’s about making something that works, lasts, and doesn’t cost more than it needs to.

If you’re a solar installer, EPC, or project designer who’s tired of off-the-shelf parts that don’t fit, that add extra time and cost to your jobs, or that don’t hold up over time, bespoke aluminium extrusions might be the solution you’ve been looking for. We work with projects of all sizes, from 10-panel residential systems to 10 MW commercial arrays, and we can help you design a profile that fits your exact needs, whether that’s slim for small gaps, reinforced for heavy snow, or custom-shaped for irregular terrain.

If you’re ready to stop settling for parts that don’t work and start using extrusions that are built for your project, get in touch to discuss your solar mounting needs. We’ll go over your layout, load requirements, and constraints, and work with you to create a custom extrusion that’s durable, cost-effective, and tailored exactly to your project.

Bespoke Aluminium Extrusions References

  1. International Code Council (ICC). (2021). International Residential Code for One- and Two-Family Dwellings. Chapter 12: Solar Energy Systems.
  2. Aluminum Association. (2022). Aluminium Extrusion Properties and Applications for Outdoor Structural Components.
  3. Solar Energy Industries Association (SEIA). (2023). Best Practices for Solar Mounting System Design and Installation.
  4. American Society of Civil Engineers (ASCE). (2022). Minimum Design Loads and Associated Criteria for Buildings and Other Structures. Chapter 29: Solar Systems.
  5. Anodizing Technology Council. (2021). Corrosion Resistance of Anodized Aluminum for Outdoor Renewable Energy Applications.

Xiamen Xihong Aluminum Industry Co., Ltd.
As one of the most professional bespoke aluminium extrusions manufacturers and suppliers in China, we’re featured by quality products and good service. Please rest assured to wholesale bulk durable bespoke aluminium extrusions made in China here from our factory. Customized orders are welcome.
Address: Unit East-1, 1st Floor, Phase II Factory Building, No.43 Xingbei Road, Jimei District, Xiamen City, China
E-mail: zhenghaiying@xmxhly.com.cn
WebSite: https://www.xihongaluminum.com/