{"id":3565,"date":"2026-10-08T20:14:23","date_gmt":"2026-10-08T12:14:23","guid":{"rendered":"http:\/\/www.lionacabin.com\/blog\/?p=3565"},"modified":"2026-10-08T20:14:23","modified_gmt":"2026-10-08T12:14:23","slug":"how-to-protect-from-power-surges-48bb-f35331","status":"publish","type":"post","link":"http:\/\/www.lionacabin.com\/blog\/2026\/10\/08\/how-to-protect-from-power-surges-48bb-f35331\/","title":{"rendered":"How to protect \u042d\u043b\u0435\u043a\u0442\u0440\u043e\u0442\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0430\u044f \u043f\u0440\u043e\u0434\u0443\u043a\u0446\u0438\u044f from power surges?"},"content":{"rendered":"

If you\u2019ve ever stood in front of a damaged piece of electrical equipment\u2014maybe a lab tester that won\u2019t turn on, a control panel that\u2019s fried beyond repair, or even a simple circuit board that shorted out out of nowhere\u2014you know how frustrating it is. As an electrical products supplier, I\u2019ve seen this problem too many times: a client brings in a piece of gear that was working perfectly last week, and now it\u2019s trash, all because of a power surge. The truth is, power surges are one of the most common, most avoidable causes of premature failure for electrical products, but a lot of people don\u2019t realize how to protect their gear correctly. Today I want to break down what power surges actually are, why they\u2019re so damaging, and exactly what you can do to safeguard your electrical products\u2014whether you\u2019re running a small workshop, managing a busy factory, or just powering your home office. \u042d\u043b\u0435\u043a\u0442\u0440\u043e\u0442\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0430\u044f \u043f\u0440\u043e\u0434\u0443\u043a\u0446\u0438\u044f<\/a><\/p>\n

<\/p>\n

First, let\u2019s get clear on what a power surge isn\u2019t. It\u2019s not just that \u201cblip\u201d when your lights dim for a second (though that could be a small surge). A power surge is a sudden, brief spike in voltage that exceeds the normal 120 volts (in North America) or 230 volts (in most of the rest of the world) that your equipment is designed to handle. These spikes can last anywhere from a few nanoseconds to several seconds, and their power is measured in joules\u2014the higher the joule rating, the more energy a surge protector can absorb.<\/p>\n

Surges come from two main places: external and internal. External surges are the big, scary ones: lightning strikes are the most well-known, but they can also come from the power company\u2019s grid switching on or off large equipment like generators, or downed power lines that send a sudden jolt of electricity through the lines. I once had a client in a rural area whose entire batch of industrial sensors was damaged when a storm a few miles away struck a power pole\u2014they didn\u2019t have any surge protection, and every unit within 50 feet of the line surge ended up with burned-out circuits.<\/p>\n

Internal surges are more common, and often sneak up on people because they don\u2019t think about them. These come from the equipment you\u2019re running on the same circuit: when a large motor turns on or off (like a compressor, a lift, or even a big air conditioner), it creates a backflow of electricity that sends a spike through the wiring. Even turning on a microwave or a space heater at the same time as sensitive gear can cause a small surge that, over months, adds up to serious damage. A lot of people don\u2019t realize that a few small surges a month might not destroy equipment right away, but they wear down internal components over time\u2014like how repeatedly hitting a wall weakens it, even if you don\u2019t break a hole right away. That\u2019s why a lot of equipment starts having random issues, like glitching displays or random resets, long before it dies completely. It\u2019s not a flaw in the product; it\u2019s unaddressed surge damage.<\/p>\n

So now that we know what we\u2019re up against, how do we actually protect electrical products from surges? Let\u2019s start with the basics, then move to more specific solutions depending on your setup.<\/p>\n

First, invest in the right surge protection devices (SPDs)\u2014not just the cheap power strips you buy at a gas station. This is where a lot of people go wrong. Those $10 power strips have a tiny amount of surge protection, maybe 300 joules at most, and they\u2019re only designed to handle small, minor spikes. For any kind of electrical product, especially sensitive ones like lab equipment, control panels, or computer servers, you need a proper surge protector that\u2019s matched to your gear\u2019s needs.<\/p>\n

There are two main types of SPDs: whole-house (or whole-building) units and point-of-use (or outlet-specific) units. Whole-house SPDs are installed at your main electrical panel, right where power comes into your building. They handle the big external surges from the grid or lightning strikes before they ever get to your outlets. For example, if lightning hits a power line a block away, the whole-house SPD will absorb that massive surge so it doesn\u2019t travel through your walls to your equipment. I always recommend these for any commercial space or home with expensive electrical gear\u2014they\u2019re a one-time installation, and they catch the worst of the surges before they reach your devices.<\/p>\n

Point-of-use SPDs are the ones you plug your devices into, and they handle the smaller, internal surges that get past the whole-house unit. These are not all the same, though. When you\u2019re shopping for a point-of-use surge protector, look for two key specs: joule rating and clamping voltage. The joule rating, like I said earlier, tells you how much energy the protector can absorb before it wears out. For sensitive gear like medical equipment, audio-visual systems, or industrial control units, you want a protector with at least 1,000 joules\u2014preferably 2,000 or more for larger, more expensive gear. The clamping voltage is the voltage at which the protector kicks in to stop the surge. A good clamping voltage is below 400 volts; anything higher means the surge could already pass through and damage your equipment before the protector engages.<\/p>\n

Another thing to look for is \u201cNEMA\u201d ratings, which tell you how well the protector is built for different environments. If you\u2019re using gear in a workshop or outdoor space, a NEMA-rated protector that\u2019s water-resistant and dust-proof is non-negotiable\u2014cheaper ones can short out if they\u2019re exposed to even a little moisture, and they won\u2019t work if they get dusty from sawdust or construction debris. I once had a client in a metal fabrication shop who used a cheap, unrated power strip for their welding controller; after six months of metal dust and occasional spills, the protector stopped working, and the controller got fried from a motor surge. Swapping it for a NEMA 4-rated point-of-use SPD fixed the problem, and they haven\u2019t had an issue since.<\/p>\n

Beyond SPDs, there are other simple steps you can take, many of which are free or low-cost. First, avoid daisy-chaining surge protectors or plugging sensitive gear into extension cords that are too long. When you plug one surge protector into another, you\u2019re reducing their effectiveness\u2014each connection can cause a small drop in voltage, and the combined protection is much less than the sum of the two. Long extension cords, especially low-quality ones, can also cause voltage drops that strain your equipment, and they don\u2019t add any surge protection. If you need to get power to a distant workbench or outlet, run a proper dedicated circuit instead of using extension cords and multiple SPDs.<\/p>\n

Another simple step is to turn off equipment when it\u2019s not in use. I know this sounds basic, but a lot of people leave their gear plugged in 24\/7, even when it\u2019s not running. When equipment is plugged in, it\u2019s drawing a small amount of power continuously, which means it\u2019s more vulnerable to small surges from the grid, even if they\u2019re not enough to turn the equipment on. Unplugging sensitive gear when it\u2019s not in use, or using a smart power strip that automatically cuts power to devices that are on standby, can reduce your risk a lot. For example, if you have a 3D printer or a CNC machine that only runs during the workday, unplugging it at night means it won\u2019t be exposed to late-night grid surges or lightning strikes when no one is around to notice an issue.<\/p>\n

For large-scale setups, like factories with multiple pieces of electrical products or server farms, you need more robust solutions. Dedicated power conditioning is something we talk about a lot with our industrial clients. Power conditioners go a step beyond surge protectors: they not only block surges, but they also regulate the voltage to make sure it stays at a consistent level, filter out electrical noise from other equipment, and even provide backup power for short outages. If you\u2019re running equipment that can\u2019t handle even small voltage fluctuations\u2014like medical imaging machines, data storage servers, or precision test equipment\u2014power conditioning is worth the investment. It\u2019s not just surge protection; it\u2019s protecting the long-term performance of your gear.<\/p>\n

I also want to mention something that a lot of suppliers don\u2019t talk about: surge protection is part of the product lifecycle, not just a one-time purchase. When we sell electrical products, we always include recommendations for surge protection because we know that even the best piece of gear will fail prematurely if it\u2019s not protected from surges. That\u2019s why we don\u2019t just sell the equipment\u2014we work with our clients to assess their setup, recommend the right SPDs, whole-house units, or power conditioners, and even help with installation if needed. We\u2019ve had clients come to us after damaging $10,000 worth of equipment because they skipped surge protection, and we\u2019ve been able to save them thousands of dollars by putting a simple, effective surge protection plan in place.<\/p>\n

Now, let\u2019s talk about some common myths that I hear all the time, because they can be costly. First myth: \u201cMy new equipment has built-in surge protection, so I don\u2019t need anything else.\u201d That\u2019s partially true, but built-in protection is usually only designed to handle very small surges, not the big ones from lightning or grid switching. It\u2019s a backup, not a primary solution. Another myth: \u201cSurge protectors are all the same.\u201d No\u2014like I said earlier, a $10 power strip is not the same as a 2,000-joule, NEMA-rated point-of-use SPD, and neither of those is the same as a whole-house unit. Using the wrong one for your setup is like using a garden hose to put out a house fire\u2014it won\u2019t work. The final myth: \u201cSurges only happen during storms.\u201d As I mentioned before, internal surges from motors and large equipment happen every day, even on clear days. You don\u2019t need a storm to have your equipment get damaged by a surge.<\/p>\n

So putting it all together, the steps to protect your electrical products from power surges are: first, assess your space and your gear\u2014what kind of equipment are you running, how much power do they need, and are they in a high-risk area (like a workshop, near power lines, or a rural area prone to storms)? Second, install a whole-house or whole-building SPD at your main electrical panel to catch the big external surges. Third, match point-of-use SPDs to your gear: look for high joule ratings, low clamping voltage, and NEMA ratings for harsh environments. Fourth, avoid daisy-chaining protectors and long extension cords, and unplug equipment when it\u2019s not in use. Fifth, for sensitive, high-value gear, invest in power conditioning for extra protection against voltage fluctuations and electrical noise.<\/p>\n

At the end of the day, protecting your electrical products from power surges isn\u2019t just about saving money on repairs or replacements\u2014it\u2019s about keeping your operations running smoothly, avoiding downtime, and extending the life of your gear. I\u2019ve seen too many businesses lose days or even weeks of work because a piece of equipment was damaged by a preventable surge, and that\u2019s something we want to help you avoid.<\/p>\n

<\/p>\n

If you have questions about what kind of surge protection is right for your setup, or if you\u2019re looking for high-quality electrical products paired with the right protection solutions, get in touch with our team to discuss your needs. We\u2019re here to help you keep your gear safe and your operations running.<\/p>\n

High Voltage Wound Rotor<\/a> References<\/p>\n